A seller hands you a bush fire report at an open home. It names the right street, but does it cover the lot you would buy and the part of the site where you want to build? Before you put a price on that extra bedroom, line up three documents: the sale contract, the council certificate and the plan attached to any assessment.
Start with the lot in the sale contract
Ask the selling agent for the contract and identify the lot and plan number with your conveyancer. Then open the NSW Rural Fire Service land checker and match the mapped parcel to the land for sale. A street address can point you towards a property, but a pin near the front gate is a poor reference if you are buying several lots or considering work at the rear. Make a separate note for each parcel in the contract.
According to the RFS explanation of bush fire prone land, councils identify land that can support a bush fire or be exposed to bush fire attack. The RFS Commissioner certifies the maps. A leafy outlook or the absence of trees in the front garden cannot tell you how the lot is designated. Record the tool you used, the date you searched and which lot you selected.
How should you follow up the map result?
The RFS checker’s conditions say the result is valid on the day of the enquiry. Maps change as new versions are certified. For confirmation, obtain the Section 10.7 planning certificate from the relevant council, or ask your conveyancer to identify the applicable certificate in the contract. Check the issue date and the land description together.
| What you have | What to do before relying on it |
|---|---|
| The selected lot is shown as bush fire prone. | Read the certificate entry for that lot. Ask council which map applies and how to check any work you are considering. |
| The checker shows no designation for the selected parcel. | Confirm the parcel and certificate. Record exactly what the checker returned. It does not assess the house’s exposure or safety. |
| A map edge runs near the house or proposed extension. | Save the map reference and identify the proposed location on a plan. Ask council or a bush fire consultant what needs site-specific assessment. |
| The certificate and the online result appear to disagree. | Send both dates, the lot and plan identifiers and the exact wording to your conveyancer and council. Keep the question open until you have an explanation. |
Does a mapped lot have a Bush Fire Attack Level?
The mapping tool identifies designated land. It does not calculate a Bush Fire Attack Level (BAL) for a building. The RFS single dwelling application kit shows why the building location matters: the assessment considers the vegetation, separation distance, effective slope and applicable fire danger index when determining BAL. Do not copy a neighbour’s rating onto your shortlist. If a seller supplies an assessment, check the property, plan, building position and proposed works it actually covers.
If the purchase depends on an extension
Write down what you want to build and where. A request about “renovation potential” gives council little to work with. A sketch showing the existing footprint and a proposed rear bedroom gives it a specific proposal to discuss. The RFS says design, materials or siting may need to change to meet protection requirements. Ask which planning pathway and evidence apply before putting a firm figure on the renovation. RFS building guidance
For a Northern Beaches purchase, the council’s planning certificate guide explains that the certificate is not development approval. A contract certificate and an approval for a particular design answer different questions. Ask council whether there are approved plans for the work you are relying on and have your legal adviser check what has been supplied. For proposed new work, the RFS also recommends checking whether your council accepts its single dwelling kit.
A question to send with the documents
“The contract identifies lot ___ in plan ___. I checked the RFS map on ___ and the certificate supplied is dated ___. I am considering an extension in the area marked on the attached sketch. Can you confirm the designation for this lot, explain any difference between the records, and tell me what further assessment I need before deciding whether to offer?”
Worked example: the assessment covers the existing house
Suppose the seller supplies a report with the existing house outlined on the site plan. The buyer wants an extra bedroom behind the house, closer to vegetation. The buyer’s agent can record the map result and ask for the report’s full plan and scope. The buyer then asks the consultant whether that location was assessed and the conveyancer whether there is any approval for those works. Until those answers arrive, the shortlist can show “existing report received; rear extension unresolved”. A construction allowance can wait for a defined scope and quote.
What to put in your Sydney buying brief
Use the property research guide to organise the address and follow-up questions. Keep the certificate issue date, result, next contact and decision deadline beside the property on your shortlist. For help reading the contract attachment, see the Section 10.7 guide. For other checks, visit the property research hub.
If you want a Sydney buyers agent to obtain documents or coordinate a second inspection, include that task and the offer deadline in your request for an introduction. Confirm services and fees directly with the provider. Baxau may receive a referral fee negotiated case by case. How introductions work